eVTOLs: Making the Alliance Stronger Between Composites and Mobility
According to a recent report on eVTOLS by Stratview Research, yearly eVTOL production volumes would reach 5,000+ units by 2028, generating a demand for ~7.4 million kilograms of composite materials around the same time.
Published: 15 Jul 2023
If we do a quick recap of the top-tier international composite and aviation-related trade shows in 2022, we can easily conclude that eVTOLs stood out to be among the most talked-about innovations throughout those events. And though they’ve been the industry’s favorite thing to write about for a long time now, the fact that we are now able to see several of those full-scale demonstrators in a single event just gives us a really good idea about how close the anticipated Advanced Air Mobility(AAM) revolution is.
eVTOLs will be one exciting paradigm shift to witness in the mobility industry and according to the claims being made by the leading eVTOL OEMs, a few handpicked cities (cities with high traffic congestion and a supporting UAM infrastructure like Los Angeles, Miami, etc.) might be witnessing hundreds of them as soon as 2025.
Since it’s mobility that we are talking about and that too, electrically powered; lightweighting has to be among the key design requirements, and considering the formidable alliance that lightweighting has with advanced materials and composites, the eVTOL industry will be among the huge demand generators for composite materials in no time.
Composites Taking it to the Skies with eVTOLs:
According to a recent report on eVTOLS by Stratview Research, yearly eVTOL production volumes would reach 5,000+ units by 2028, generating a demand for ~7.4 million kilograms of composite materials around the same time. Taking into account, the potential changes in the cost of carbon fibre, and resin, the demand thus generated in the year 2028 for composite materials, by the eVTOL industry is estimated to be worth $517 million in value.
Fig. 1: eVTOL units manufactured annually & Corresponding composite material demand (2024-2028)
What must be noted here is, as per the disclosed information, Joby is running at least one step ahead of others in the certification race since it has already received the Means of Compliance from the FAA, and still has a commercialization target of 2025. On the other hand, some OEMs still don’t have their certification basis confirmed with the concerning regulatory authorities, which is the step before receiving the means of compliance; and yet they are planning to start commercialized operations in 2024. But, regardless of the year of entry into service, the demand for composite materials from the eVTOL industry will more than double every year during the initial 2-3 years of commercialization and it will happen primarily because of two factors.
All leading eVTOL OEMs are planning to scale their manufacturing volumes very rapidly, by a factor >2x every year, once they receive a nod from the regulatory authorities.
Though tentative, many leading OEMs have several hundreds of pre-orders in their respective order books.
Another factor contributing to the high demand for composite materials from this industry is the high penetration as compared to its allies in the transportation industry. For instance, the pioneers of composites usage in aircraft, namely the Boeing 787 and Airbus A350 XWB, are both ~50% composites by weight. For light vehicles, the percentage is generally <15% and for eVTOLs, even the lower range is higher than the higher range of other industries, i.e., 70%, and for some programs, it can go as high as >90%.
Some major applications of composites in eVTOLs are shown in the figure below.
Fig. 2: Major applications of composites in eVTOLs
Structures and propulsion systems combinedly will consume about 75-80% of the composite materials used in these aircraft, with interior applications like floor panels, beams, etc. being second in line with an approximate share of 12-14%. The remaining share will belong to avionics and other smaller applications.
It’s no wonder that the cost breakdown for the manufacturing of eVTOLs, as suggested by leading OEMs, also follows a similar distribution. For example, according to the estimates by Vertical Aerospace, 40% of the manufacturing cost will be spent on battery and propulsion systems, followed by another 30% being spent on structures and interiors. Avionics will account for ~20% of the manufacturing cost and the rest will be the cost of assembly.
